G950U unlock succesfull but no signal

Home  >>  Z3X box Section  >>  G950U unlock succesfull but no signal

G950U unlock succesfull but no signal

On January 25, 2018, Posted by , In Z3X box Section, With 9 Comments


Hello Z3X Team pls to be helped me Along with G950U AT&T unlock
I use unlock by server and was done successfully but no signal on phone

UNLOCK INSTRUCTIONS:
Unlocking Along with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you cant unlock this phone Along with MSL.
1. Phone must be powered on.
2. Type *#0808# and select DM+ACM+ADB.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press Unlock button.
6. Paste MSL code in new opened window and press OK.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on Build number in Settings-About phone to enable Developer options,
go to Settings-Developer options and enable USB debugging.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Select device in ADB settings.
5. Press Read Codes via server button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950U
Selected port: COM58 SAMSUNG Mobile USB Serial Port
Software version: 30.4

Checking Login and Password… OK
Ballance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device…
kindly, allow USB debugging on phone… OK
Reading phone info…
Model: SM-G950U
Android version: 7.0
Product code: SM-G950UZSAATT
Phone version: G950USQU1AQDE
PDA version: G950USQU1AQDE
CSC version: G950UOYN1AQDE
CSC country code: USA
CSC sales code: ATT
HW version: REV1.0
Phone SN: R38J403DZ9X
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-04-01
RF cal date: 2017.04.04
IMEI: 35772308035 I will provide full imei on private if it necessary
Rebooting phone… OK
Waiting ADB device… OK
Rebooting phone… OK
Waiting ADB device… OK
Waiting for device to become ready… OK
Initialization zTool… OK
Running zTool, kindly wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data from phone… OK
Searching Ramdump interface… COM18 detected
Reading data from phone… OK
Calculating… OK
Searching server… OK
Waiting for server answer… OK
Freeze code: 19719314
NET lock: 02079407
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
Done Along with Samsung Tool PRO v.30.4

here are some pics
https://imgur.com/a/u1VaG
https://imgur.com/a/FMXfv
https://imgur.com/a/L80Nv

kindly sugest what to do ! thanks in advance

9 Comments so far:

  1. Jaydude says:

    Mipi device failed it should be hardware

    nIF YOU LIKE WHAT I POST PRESS THANKS BUTTON

  2. tavenger5 says:

    i have the exact same issue Along with an att z7 have you found solution

  3. Metaton-alfred says:

    thanks for your answer souma_k but could you be more specific?what should i check?

  4. TechGuru says:

    playboy54321 i hope that Mr Blang would see this thread and answer as soon as he can

  5. TechGuru says:

    Hardware prob baseband open the phone and heat baseband ic

    nSent from my Le X829 using Tapatalk

  6. sulmanz says:

    I discover now that my radio is off and i don’t know how to put on

  7. Bo-Rens says:
    Quote:
    rn pashamangl
    I discover now that my radio is off and i don’t know how to put on

    this problem is not related to read codes.

    rnnext time before any activation Along with locked phone very simple
    rntype *#0011# to see what problem phone have.

  8. Jaydude says:

    Ok Mr Blang I don’t request credit back as you see I just want a to be helpeding hand.
    nWhat could I do?I really want a solution.thanks

  9. RandikPixie says:
    Quote:
    rn pashamangl
    Ok Mr Blang I don’t request credit back as you see I just want a to be helpeding hand.
    rnWhat could I do?I really want a solution.thanks

    kindly use search button on forum how users fix this problem.

    rnthis mostly hardware problem.