g950w unlock error with credits

Home  >>  Z3X box Section  >>  g950w unlock error with credits

g950w unlock error with credits

On January 24, 2015, Posted by , In Z3X box Section, With 3 Comments


UNLOCK INSTRUCTIONS:
Unlocking Along with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you cant unlock this phone Along with MSL.
1. Phone must be powered on.
2. Type *#0808# and select DM+ACM+ADB.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press Unlock button.
6. Paste MSL code in new opened window and press OK.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on Build number in Settings-About phone to enable Developer options,
go to Settings-Developer options and enable USB debugging.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Select device in ADB settings.
5. Press Read Codes via server button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950W
Selected port: COM5 Z3X BOX Serial Port
Software version: 29.5

Checking Login and Password… OK
Ballance: 45 crd.
Waiting ADB device… OK
Reading phone info…
Model: SM-G950W
Android version: 7.0
Product code: SM-G950WZKAXAC
Phone version: G950WVLU1AQG5
PDA version: G950WVLU1AQG5
CSC version: G950WOYA1AQG5
CSC country code: Canada
CSC sales code: XAC
HW version: REV1.0
Phone SN: R28J807K8VT
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-07-01
RF cal date: 2017.08.04
IMEI: 355757083041679
Initialization zTool… OK
Running zTool, kindly wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data from phone… OK
Searching Ramdump interface… COM43 detected
Reading data from phone… error (3)

Done Along with Samsung Tool PRO v.29.5

Please reply whats the problem

3 Comments so far:

  1. Bo-Rens says:
    Quote:
    rn jainmunda< >
    UNLOCK INSTRUCTIONS:
    rn Unlocking Along with original MSL code:
    rn Warning! Knox warranty must be active (0x00)!
    rn If you have it voided (0x01(void)), then you can’t unlock this phone Along with MSL.
    rn 1. Phone must be powered on.
    rn 2. Type *#0808# and select ‘DM+ACM+ADB’.
    rn 3. Run dialer and type *#0*# (service mode will apear).
    rn 4. Connect the phone to USB cable, choose correct COM port in port settings.
    rn 5. Press ‘Unlock’ button.
    rn 6. Paste MSL code in new opened window and press ‘OK’.

    rn Reading codes using sever:
    rn 1. Power on the phone.
    rn 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    rn go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    rn 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    rn 4. Select device in ADB settings.
    rn 5. Press ‘Read Codes via server’ button, write your login and password in window if it will apear.
    rn (Login and password will be saved as default after first input and can be changed in settings.)

    rnOperation: Read Codes via Server
    rnSelected model: SM-G950W
    rnSelected port: COM5 Z3X BOX Serial Port
    rnSoftware version: 29.5

    rnChecking Login and Password… OK
    rnBallance: 45 crd.
    rnWaiting ADB device… OK
    rnReading phone info…
    rnModel: SM-G950W
    rnAndroid version: 7.0
    rnProduct code: SM-G950WZKAXAC
    rnPhone version: G950WVLU1AQG5
    rnPDA version: G950WVLU1AQG5
    rnCSC version: G950WOYA1AQG5
    rnCSC country code: Canada
    rnCSC sales code: XAC
    rnHW version: REV1.0
    rnPhone SN: R28J807K8VT
    rnChip name: MSM8998
    rnModem board: MSM8998
    rnSecurity patch: 2017-07-01
    rnRF cal date: 2017.08.04
    rnIMEI: 355757083041679
    rnInitialization zTool… OK
    rnRunning zTool, kindly wait…
    rnStart… OK
    rnInitialization… OK
    rnGenerate and check client proof… OK
    rnVerify proof by client… OK
    rnReading data from phone… OK
    rnSearching Ramdump interface… COM43 detected
    rnReading data from phone… error (3)

    rnDone Along with Samsung Tool PRO v.29.5

    rnPlease reply whats the problem

    full reset and try again.
    rnshould work. every day i see success code reading for this model.

  2. RandikPixie says:

    not done Along with z3x but successful code read Along with ******

  3. igglo7pays says:

    Again same Along with other phone same **** no solution

    n UNLOCK INSTRUCTIONS:
    n Unlocking Along with original MSL code:
    n Warning! Knox warranty must be active (0x00)!
    n If you have it voided (0x01(void)), then you can’t unlock this phone Along with MSL.
    n 1. Phone must be powered on.
    n 2. Type *#0808# and select ‘DM+ACM+ADB’.
    n 3. Run dialer and type *#0*# (service mode will apear).
    n 4. Connect the phone to USB cable, choose correct COM port in port settings.
    n 5. Press ‘Unlock’ button.
    n 6. Paste MSL code in new opened window and press ‘OK’.

    n Reading codes using sever:
    n 1. Power on the phone.
    n 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    n go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    n 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    n 4. Select device in ADB settings.
    n 5. Press ‘Read Codes via server’ button, write your login and password in window if it will apear.
    n (Login and password will be saved as default after first input and can be changed in settings.)

    nOperation: Read Codes via Server
    nSelected model: SM-G950W
    nSelected port: COM5 Z3X BOX Serial Port
    nSoftware version: 29.6

    nChecking Login and Password… OK
    nBallance: 45 crd.
    nWaiting ADB device… OK
    nReading phone info…
    nModel: SM-G950W
    nAndroid version: 7.0
    nProduct code: SM-G950WZKABMC
    nPhone version: G950WVLU1AQI3
    nPDA version: G950WVLU1AQI3
    nCSC version: G950WOYA1AQI3
    nCSC country code: Canada
    nCSC sales code: BMC
    nHW version: REV1.0
    nPhone SN: R28J91Q4ZCW
    nChip name: MSM8998
    nModem board: MSM8998
    nSecurity patch: 2017-08-01
    nRF cal date: 2017.09.14
    nIMEI: 351811090439287
    nInitialization zTool… OK
    nRunning zTool, kindly wait…
    nStart… OK
    nInitialization… OK
    nGenerate and check client proof… OK
    nVerify proof by client… OK
    nReading data from phone… OK
    nSearching Ramdump interface… COM11 detected
    nReading data from phone… error (3)

    nDone Along with Samsung Tool PRO v.29.6