G955u t-mobile cant unlock and lost credit

Home  >>  Z3X box Section  >>  G955u t-mobile cant unlock and lost credit

G955u t-mobile cant unlock and lost credit

On January 26, 2018, Posted by , In Z3X box Section, With Comments Off on G955u t-mobile cant unlock and lost credit


TRYING TO UNLOCK T-MOBILE N950U N LOST THE CREDIT HERE IS THE LOG

UNLOCK INSTRUCTIONS:
Unlocking Along with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you cant unlock this phone Along with MSL.
1. Phone must be powered on.
2. Type *#0808# and select DM+ACM+ADB.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press Unlock button.
6. Paste MSL code in new opened window and press OK.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on Build number in Settings-About phone to enable Developer options,
go to Settings-Developer options and enable USB debugging.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Select device in ADB settings.
5. Press Read Codes via server button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock
Selected model: SM-G955U
Selected port: COM20 SAMSUNG Mobile USB Serial Port
Software version: 30.4

Checking Login and Password… OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device…
kindly, allow USB debugging on phone…
kindly, allow USB debugging on phone… OK
Reading phone info…
Model: SM-G955U
Android version: 7.0
Product code: SM-G955UZSATMB
Phone version: G955USQU1AQHD
PDA version: G955USQU1AQHD
CSC version: G955UOYN1AQHD
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R28J41AE8CE
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-08-01
RF cal date: 2017.11.02
IMEI: XXXXXXXXXXXXXXXXX
Rebooting phone… OK
Waiting ADB device…
kindly, allow USB debugging on phone…
kindly, allow USB debugging on phone… OK
Rebooting phone… OK
Waiting ADB device…
kindly, allow USB debugging on phone…
kindly, allow USB debugging on phone…
kindly, allow USB debugging on phone… OK
Waiting for device to become ready… OK
Initialization zTool… OK
Running zTool, kindly wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data from phone… OK
Rebooting to upload… OK
Searching Ramdump interface… COM7 detected
Reading data from phone… OK
Calculating… OK
Searching server… OK
Waiting for server answer… OK
Waiting ADB device…
Exception: Access violation at address 72C67358 in module RICHED20.DLL. Read of address 00000008

Done Along with Samsung Tool PRO v.30.4

Comments are closed.