how to check dead boot in s3 and note2

Home  >>  Samsung Android Phones  >>  how to check dead boot in s3 and note2

how to check dead boot in s3 and note2

On January 20, 2015, Posted by , In Samsung Android Phones, With Comments Off on how to check dead boot in s3 and note2

hi friends ,


this is how to check your samsung galaxy gt i9300 or gt n7100 wether its dead boot or not

first thing, you want regulated power supply,

now lets start.

for example you have dead i9300 in hand and you want to check if it can prepair via isp or s-boot clip
, just connect your dead i9300 to power supply and power it on ,

if your power supply read up to 12% or up to 15% and return to 00% after u release the power button ,
then your phone have good hardware you can repair it via isp or s-boot clip,

but if your dead phone read up to 8% or up to 10% check the power ic

if your dead phone read up to 18% or up to 20% emmc damage you want to replace it ,, tested by me 100%

← →

No Comment so far:

  1. TechGuru says:
    January 20, 2015 at 11:32 am

    Thanks for share this useful post i want little to be helped from u which voltage select on power supply

  2. Wela says:
    January 20, 2015 at 2:32 pm

    thanks a lot for this usefull post

  3. ExpertBuddy says:
    January 20, 2015 at 5:32 pm
    Quote:
    showket
    Thanks for share this useful post i want little to be helped from u which voltage select on power supply

    the display on your power supply shuld be like this , 0.00 : 04.6
    so when you power on your phone it will start reading from the left side of your power supply display , check from there,,, title=wink

  4. TechWorld says:
    January 20, 2015 at 11:32 pm

    Hi,
    Can you to be helped me Along with this Please ?

    I test as you told but,

    I connect power suply but show 0.xx 04.1 always, not when press pwr buttom title=confused
    Which is the problem in this case ?

    You understand me ?

    Thanks

  5. Wela says:
    January 21, 2015 at 1:32 am
    Quote:
    Dany
    Hi,
    Can you to be helped me Along with this Please ?

    I test as you told but,

    I connect power suply but show 0.xx 04.1 always, not when press pwr buttom title=confused
    Which is the problem in this case ?

    You understand me ?

    Thanks

    contact me on yahoo…

  6. TechWorld says:
    January 21, 2015 at 3:32 am
    Quote:
    high-tech
    contact me on yahoo…

    Hi and thanks for your reply.
    Do you have skype messenger ?
    regards

  7. TechGuru says:
    January 21, 2015 at 9:32 am

    Pls I want your to be helped put me tru o hardware solution this is my skpe name davis.izevbuwa2 or [email protected]

  8. TechWorld says:
    January 21, 2015 at 2:32 pm

    high tech can u pls show how connect to pinout on i9300.i will grateful

  9. newComer says:
    January 21, 2015 at 3:32 pm

    kindly, try to explain measured in amperes.

    Wbr