ipad mini problem – cellphone of iphone hardware strange problem

No Comment so far:

1. Wela says:

   January 27, 2015 at 10:18 pm

   Quote:

   k hello, yes i know use search button i have have i pad mini, digitizer replaced soldering perfect but power button no work properly and touch not work, done before many successfully but this one pain in the ***** what could be wrong home button perfect on aswell home button works,perfect tried 4 digitizer same thing touch unresponsive! tried reboot and factory reset nothing aaah to be helped pls,thanks

   do you think i damage something?

2. TechGuru says:

   January 28, 2015 at 4:18 am

   anybody? do i want change ic connector to board?

   i tried new home flex still same ?

3. newComer says:

   January 28, 2015 at 10:18 am

   Unplug digitizer and then check power button working or not? If yes then resolder digitizer to controller also resolder other end of controller I mean connector side that goes to motherboard.

4. ExpertBuddy says:

   January 28, 2015 at 3:18 pm

   press and hold power button .
   see if SLIDE TO POWER OFF windows appear or not ?

   if appear, then you want to go to Settings > and change lock button / power settings.

   I was stressed Along with this issue when i did my first iPad mini.
   but power button can be disabled/enabled from the settings.

   post result of this settings first, then we move to next procedure .

   LITTLE MASTER

5. TechWorld says:

   January 28, 2015 at 6:18 pm

   I have the same issue i changed 5 times but no luck. The touch screen still not responding. Post more solution pls.

6. TechWorld says:

   January 28, 2015 at 9:18 pm

   try to to change home button strip ……….

7. newComer says:

   January 29, 2015 at 3:18 am

   I did that also but nothing happen I try another touch that came from other mini still same problem any other solution? thanks in advance.

8. Wela says:

   January 29, 2015 at 4:18 am

   Kammy did you fix your mini

9. newComer says:

   January 29, 2015 at 7:18 am

   Quote:

   ray I did that also but nothing happen I try another touch that came from other mini still same problem any other solution? thanks in advance.

   Check your fpc connector from the board, sometimes you pulled the digitizer plug out too hard from the board, the pin came out Along with it, so you have to replace that fpc connector on the board. If the connector is ok then check for filters around it to see if theres anything else missing.
   Let me know if you still want to be helped.

10. TechWorld says:

    January 29, 2015 at 12:18 pm

    Quote:

    Unplug digitizer and then check power button working or not? If yes then resolder digitizer to controller also resolder other end of controller I mean connector side that goes to motherboard.

    he is right unplug digitaizer and try on off button

11. Wela says:

    January 29, 2015 at 3:18 pm

    Same Problem here.
    Thx @ little master first i thought my power button is damged.

    But my digitizer doesnt work…fpc connector is good, is the first digitizer i bought, maybe this one is damaged

12. ExpertBuddy says:

    January 29, 2015 at 5:18 pm

    any solution ? i have the same problem, touch not working, i have already tried a lot of touches but the problem is in the main board, checked filters and connector but everything is ok.

13. TechGuru says:

    January 29, 2015 at 8:18 pm

    hi… pls to be helped ipad mini no light lcd.. all working but no light.. is there any solution..

14. newComer says:

    January 30, 2015 at 1:18 am

    Exactly same problem here touch and power button not working. I changed the FPC connector and the bottom right last pad got lifted from the board. kindly experts can you tell me solution.