iPhone 4S screen looks wet , & iphone

Home  >>  iPhone  >>  iPhone 4S screen looks wet , & iphone

iPhone 4S screen looks wet , & iphone

On March 29, 2015, Posted by , In iPhone, With Comments Off on iPhone 4S screen looks wet , & iphone

Any to be helped is much appreciated. I have a CDMA white iPhone 4s 16GB that wanted a new battery. Aside from that, my wife was also having problems Along with the + – side volume buttons, volume would keep increasing and even after hitting the lower volume – key, magically the phone would keep increasing the volume back to full volume. I am very technical, do IT support for a living, great at soldering, breakdown, repair, etc. I replaced the battery in my own black 32GB iPhone 4s then Along with no issues and then worked on my wifes. I used electrical contact cleaner to lightly spray the + – side volume buttons Along with the hope of fixing her volume issue. I also had compressed air to **** out excess cleaner and dry quickly. I also loosened and then re-tightened the screws around the volume assembly. Go figure, volume issue fixed but now the screen looks all blotched and wet looking. I took apart again and cleaned Along with rubbing alcohol, I then completely removed the board, cleaned in alcohol, dried Along with compressed air, same issue. Cleaned the contacts on the video ribbon one final time, same problem. See photos, any ideas how to fix, clean, or what to purchase is much appreciated. Phone works great, screen just looks like ****, to be helped! title=embarrasment)

No Comment so far:

  1. Metaton says:

    There might be some alcohol or something between the lightbox and the lcd.

    Have you got any picture of it?

    Or if you havent, are there any dark spot on thhe screen?

  2. tavenger5 says:

    post a picture to see ,maybe is the backlight, when is that u can take the light from some cracked lcd no matter is 4 or 4s its same,or u can order it on aliexpress.

  3. arminasg says:

    Yes when its the lightbox you can take one from a cracked screen or purchase them cheaply somewhere.

    Be careful when placing it on the screen and place it exactly on the right position, else
    Your screen will look weird.

    You do want a soldering iron for the led cables!