Home >> iPhone >> iphone 5 dropped display like this !! – problem in cellphone
i have iphone 5 after fall down display like this:
i want to be helped !
whats the problem??
no any thing ?!!!
any solution !!!
The flex cable of LCD maybe broken.
Didnt find anything as solution, will see in wait .
Because you are lazy to search here i search for you Before Open a Thread Search Here Hardware Solutions! If all filters are good then CPU might be problem because LCD Data lines go there!
difference in question iphone 5 and answer is about iphone 4
i know u r a great poster of solution but here is a answer difference only thats why its search is not working
I have seen this several times Along with the iPhone 5 and it has always been the LCD flex cable for me. It may be possible to reposition the flex cable Along with insulation tape between the flex layers and reduce or remove the lines, otherwise a replacement LCD should fix this.
Solution- tested by me today. First i tried another lcd, no results, than i removed those two components, and now works perfect.
sometimes the screen goes like this when fitting new lcd, open the iPhone disconnect the lcd and digi and re attach.
LCD cable wants to be re-attached property to the board.
Is this working I dont think so
can u try replace another lcd bro
replace or remove c350,c351,c353
Replace the LCD cable it might have broken down.
Same problem. Can confirm that the flexcable usually is the bad guy but not this time. Tried a couple of different LCDs, resoldered the lcd-pcb-connector (J5) and did even try to remove C350, C351, C353 Along without any other results than vertical stipes.
The screen appears to work for short moments when the phone is cooled down (0*C)
Any other idéas?