iphone 5s error 1 – ios version issue

Home  >>  iPhone  >>  iphone 5s error 1 – ios version issue

iphone 5s error 1 – ios version issue

On March 28, 2015, Posted by , In iPhone, With Comments Off on iphone 5s error 1 – ios version issue

iphone 5s before was in searching mode i did restore and update and give me error 1


what is the solution for this want urgent to be helped plss tnx

no problem if searching mode again but phone should be removed from recovery mode?????

No Comment so far:

  1. RandikPixie says:

    its hardware issue Along with ur iphone 5s.anyway try Along with different cable or diffrent pc,may be it will to be helped you.also check you are using latest version of ituns.

  2. RandikPixie says:
    Quote:
    javeed >
    iphone 5s before was in searching mode i did restore and update and give me error 1

    what is the solution for this want urgent to be helped plss tnx

    no problem if searching mode again but phone should be removed from recovery mode?????

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.

    Try to restore your iOS device two more times while connected Along with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

    It is mostly a hardware problem .

  3. RandikPixie says:

    reball ic bb

    br:
    mike shinoda

  4. TechGuru says:

    Change Charging Flex and Reball Baseband then put in DFU and try to Restore . Post Results

  5. sulmanz says:

    Some phones i have fix Along with use original cable and change charging strip
    best of luck

    Br
    Naksh

  6. Wela says:

    I have lots of cellphone want to repair and unlock, kindly contact me. Appreciate

  7. arminasg says:
    Quote:
    javeed >
    iphone 5s before was in searching mode i did restore and update and give me error 1

    what is the solution for this want urgent to be helped plss tnx

    no problem if searching mode again but phone should be removed from recovery mode?????

    Hello Sir,
    Your Porblem Hardware Baseband Chip title=frown

  8. Metaton-alfred says:
    Quote:
    GS >
    Hello Sir,
    Your Porblem Hardware Baseband Chip title=frown

    hello sir,

    its there anyway to repair this error. i have 10 – 20 pcs error 1,9,13,10 (iphone5s)
    i will pay if there any solution for this case.

    thx

  9. tavenger5 says:

    Guys i will take over this project sense i bought the device.
    I will double check how reflow was done.
    Before anyone start point fingers at baseband ic they should check the power that comes to bb.
    It is easy mislead inexperienced member to make more damage to the device.
    As everyone knows it is hard to replace ic that is glued to the pcb.
    Also everyone think that ic glued to prevent repair on the device ( glue designed to dissipate heat from ic to the motherboard and preventing bga losing contacts do to thin pcb Along with small pads spacing pitch on the ic while hot or cold temperatures.)
    I will be straight forward and tell you that i am NOT pro at fixing such fragile devices. From my previous experience i have screw up two iphone 4s boards by trying replacing bb ic.
    I keep proper temperature on hot air and still able damaged pads under bb ics.
    Thanks I will keep you posted.

  10. igglo7pays says:

    phone 5s error 1 pls to be helped
    change new batery but not done

  11. Ann Elmore says:

    As I said i will follow on the progress.
    Itunes restore error 1 do to hardware failure.
    If iTunes cant identify IMEI your device will not be restored no matter what you will try.
    Reason is: when itunes doing restore to the device Itunes will want IMEI of the device to put proper firmware and restrictions to the device per carrier.
    If baseband IC or circuit not operational Itunes does not know what firmware put on the device and will fail at 60 + – %.
    Before any of you even thing about touching or messing Along with baseband ICs kindly think 2s before you do this.
    Always check power driver before even opening EMI shield over baseband circuit.
    In my case it was U2_RF PM8018-0 IC that fail.
    More or less this RF Power IC does not have epoxy and may fail do to temperature. Device like this can fail because of small pitch between pins under BGA. Heat and cold warped the pcb just enough to break the connection under IC.

    PS.
    If you think replacing Baseband IC think 2s… if you get baseband from Alibaba that is new and sealed and later on tring to restore your Iphone Along with iTunes you will fail!! Fail because IMEI on new basebend IC not registered Along with Itunes database. Itunes will reject unknown IMEI.
    Thanks and good luck to you all.

  12. newComer says:
    Quote:
    As I said i will follow on the progress.
    Itunes restore error 1 do to hardware failure.
    If iTunes cant identify IMEI your device will not be restored no matter what you try.
    Reason is: when iTunes doing restore to the device iTunes will want IMEI of the device to put proper firmware and restrictions to the device per carrier.
    If baseband IC or circuit not operational iTunes does not know what firmware to put on the device and will fail at 60 + – %.
    Before any of you even think about touching or messing Along with baseband ICs kindly think 2s.
    Always check power driver before even opening EMI shield over baseband circuit.
    In my case it was U2_RF PM8018-0 IC that fail.
    More or less this RF Power IC does not have epoxy and may fail do to temperature fluctuation. Device like this can fail do to small pitch between pins under BGA. Heat and cold warped the pcb just enough to break the connection under IC.

    PS.
    If you think replacing Baseband IC DONTT DO IT.. If you get Baseband from Alibaba that is new sealed and later on trying to restore your Iphone Along with iTunes … you will fail!! Fail because IMEI on new basebend IC not registered Along with iTunes database. Itunes will reject unknown IMEI.
    Thanks and good luck to you all.

    kindly support me and donate if this information saved your device and save you money. www . gidcircuits . com