iphone 5s water damage, completely dead – ios version issue

Home  >>  iPhone  >>  iphone 5s water damage, completely dead – ios version issue

iphone 5s water damage, completely dead – ios version issue

On March 28, 2015, Posted by , In iPhone, With Comments Off on iphone 5s water damage, completely dead – ios version issue

I have an iphone 5s and it dropped to a pool Along with chlorine water. I removed the motherboard shield and i cleaned Along with isopropyl alcohol and i think there is no more corrosion. But phone does not power on, it is completely dead, does not recognize from itunes, no sigh of life. Battery is dead, i change battery but nothing. The new battery has no power too but does not charge when i plug the usb cable. My knowlenge ends here and i really want your to be helped. I have pictures of the motherboard but i can not upload here because iam new user.


No Comment so far:

  1. Bo-Rens says:
    Quote:
    johnfl21
    I have an iphone 5s and it dropped to a pool Along with chlorine water. I removed the motherboard shield and i cleaned Along with isopropyl alcohol and i think there is no more corrosion. But phone does not power on, it is completely dead, does not recognize from itunes, no sigh of life. Battery is dead, i change battery but nothing. The new battery has no power too but does not charge when i plug the usb cable. My knowlenge ends here and i really want your to be helped. I have pictures of the motherboard but i can not upload here because iam new user.

    full wash the motherboard u2 ic location and little bite heat the motherboard title=smile

  2. tavenger52 says:
    Quote:
    saifjaan009
    full wash the motherboard u2 ic location and little bite heat the motherboard title=smile

    You think the reason that has no sigh of life is u2 ic? If i install a new battery full charged will i have sigh of lige?

  3. newComer says:

    anyone other ideea for this?

  4. killu says:

    Maybe a idea to check if the the battery connector has a short ?

    First meassure the battery not connected to the terminal, then test it connected to the terminal if theres no voltage reading then you have a short on the pcb.

    You can also do a beep test on the vcc and ground on the terminal connecto to see if it shorts.

  5. igglo7pays says:
    Quote:
    saifjaan009
    full wash the motherboard u2 ic location and little bite heat the motherboard title=smile

    If i clean it and the result is the same do you suggest to change u2 ic? Do i have chances to start my phone?

  6. Metaton says:

    There are several small components in size 0201 which you might not see if they are cracked. It could be your problem, several cracked components due to shorting cause of the water.

  7. Bo-Rens says:
    Quote:
    gkhn
    There are several small components in size 0201 which you might not see if they are cracked. It could be your problem, several cracked components due to shorting cause of the water.

    you means chips or transistors?

  8. igglo7pays says:

    anything cracked , also the resistor , capacitor, diodes and so on. You can not see any cracked component Along without microscope