j500f fail reset msl

Home  >>  Z3X box Section  >>  j500f fail reset msl

j500f fail reset msl

On January 27, 2018, Posted by , In Z3X box Section, With 14 Comments


here log

Waiting ADB device… OK
Reading phone info…
Model: SM-J500F
Android version: 5.1.1
Product code: Not Active
Phone version: J500FXXU1AOG1
PDA version: J500FXXU1AOG1
CSC version: J500FOJV1AOG5
CSC country code: SOUTH AFRICA
CSC sales code: XFA
HW version:
Phone S/N: RV8G71TMKGY
Modem board: MSM8916
RF cal date: NONE
IMEI:
Checking Super user right… true
Initialization RIL… OK
Reseting MSL security… error
Rebooting phone… OK
Reset MSL done

Done Along with Samsung Tool PRO v.23.5

BACKUP INSTRUCTIONS:
Phone must be rooted!
If the software cant root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on Build number in Settings-About phone to enable Developer options,
go to Settings-Developer options and enable USB debugging.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Select device in ADB settings.
5. Press Read EFS button to read backup or Write EFS to restore or
press Write CERT to restore certificates.

To backup/restore QCN, phone diagnostic port must be enabled.
1. Power on the phone.
2. Type *#0808# and select DM+MODEM+ADB.
3. Type *#9090# and select DM/DUN over HSIC.
Or use Activate Diag function from Repair tab.
4. Connect phone to PC Along with USB cable, install drivers if wanted.
5. Select diagnostic port in port settings.
6. Press Read QCN button to read NV backup or Write QCN to restore.

Operation: Write CERT
Selected model: SM-J500F
Selected port: COM347 SAMSUNG Mobile USB Serial Port
Software version: 23.5

Checking certificate file… OK
KEY ID: 0338
Waiting ADB device… OK
Reading phone info…
Model: SM-J500F
Android version: 5.1.1
Product code: Not Active
Phone version: J500FXXU1AOG1
PDA version: J500FXXU1AOG1
CSC version: J500FOJV1AOG5
CSC country code: SOUTH AFRICA
CSC sales code: XFA
HW version:
Phone S/N: RV8G71TMKGY
Modem board: MSM8916
RF cal date: NONE
IMEI:
Initialization AT RIL… OK
Bypass MSL… error (2)
First reset MSL

Done Along with Samsung Tool PRO v.23.5

14 Comments so far:

  1. killu says:

    i write QCN still same any idea wht to do

  2. TechGuru says:

    Make wipe/reset it will work

    nSent from my HTC One using Tapatalk

  3. Ann Elmore says:
    Quote:
    rn arvin >
    Make wipe/reset it will work

    nSent from my HTC One using Tapatalk

    already try tht still not working

  4. sulmanz says:

    Dear Bro Check…!

    rnAlong withe Samsung Tool PRO v.19.1

    rnGood Luck….!

    rnQais Khan Swati….!title=roll

  5. Jaydude says:
    Quote:
    rn Qais Khan >
    Dear Bro Check…!

    nAlong withe Samsung Tool PRO v.19.1

    nGood Luck….!

    nQais Khan Swati….!title=roll

    n19.1 dnt support j500f

  6. Metaton-alfred says:

    you want a SBOOT to reset MSL

  7. ExpertBuddy says:
    Quote:
    rn S >
    you want a SBOOT to reset MSL

    do u hve then share it here

  8. kijiji says:
    Quote:
    rn S >
    you want a SBOOT to reset MSL

    do u have then share it here kindly ?

  9. Metaton says:

    it still same

    rn BACKUP INSTRUCTIONS:
    rn Phone must be rooted!
    rn If the software can’t root the phone automatically,
    rn then you must root your device manually.
    rn 1. Power on the phone.
    rn 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    rn go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    rn 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    rn 4. Select device in ADB settings.
    rn 5. Press ‘Read EFS’ button to read backup or ‘Write EFS’ to restore or
    rn press ‘Write CERT’ to restore certificates.

    rn To backup/restore QCN, phone diagnostic port must be enabled.
    rn 1. Power on the phone.
    rn 2. Type *#0808# and select ‘DM+MODEM+ADB’.
    rn 3. Type *#9090# and select ‘DM/DUN over HSIC’.
    rn Or use ‘Activate Diag’ function from ‘Repair’ tab.
    rn 4. Connect phone to PC Along with USB cable, install drivers if wanted.
    rn 5. Select diagnostic port in port settings.
    rn 6. Press ‘Read QCN’ button to read NV backup or ‘Write QCN’ to restore.
    rn Selected model: SM-J500F
    rnSelected port: COM347 SAMSUNG Mobile USB Serial Port
    rnSoftware version: 23.9

    rnReading phone info…
    rnReading IMEI… OK
    rnIMEI: 0
    rnReseting MSL security… OK
    rnReseting… OK
    rnReset MSL done

    rnDone Along with Samsung Tool PRO v.23.9

    rn BACKUP INSTRUCTIONS:
    rn Phone must be rooted!
    rn If the software can’t root the phone automatically,
    rn then you must root your device manually.
    rn 1. Power on the phone.
    rn 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    rn go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    rn 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    rn 4. Select device in ADB settings.
    rn 5. Press ‘Read EFS’ button to read backup or ‘Write EFS’ to restore or
    rn press ‘Write CERT’ to restore certificates.

    rn To backup/restore QCN, phone diagnostic port must be enabled.
    rn 1. Power on the phone.
    rn 2. Type *#0808# and select ‘DM+MODEM+ADB’.
    rn 3. Type *#9090# and select ‘DM/DUN over HSIC’.
    rn Or use ‘Activate Diag’ function from ‘Repair’ tab.
    rn 4. Connect phone to PC Along with USB cable, install drivers if wanted.
    rn 5. Select diagnostic port in port settings.
    rn 6. Press ‘Read QCN’ button to read NV backup or ‘Write QCN’ to restore.

    rnOperation: Write CERT
    rnSelected model: SM-J500F
    rnSelected port: COM347 SAMSUNG Mobile USB Serial Port
    rnSoftware version: 23.9

    rnChecking certificate file… OK
    rnKEY ID: 0338
    rnWaiting ADB device… OK
    rnReading phone info…
    rnModel: SM-J500F
    rnAndroid version: 5.1.1
    rnProduct code: Not Active
    rnPhone version: J500FXXU1AOG1
    rnPDA version: J500FXXU1AOG1
    rnCSC version: J500FOJV1AOG5
    rnCSC country code: SOUTH AFRICA
    rnCSC sales code: XFA
    rnHW version:
    rnPhone S/N:
    rnModem board: MSM8916
    rnRF cal date: NONE
    rnIMEI:
    rnInitialization AT RIL… OK
    rnBypass MSL… error (2)
    rnFirst reset MSL

    rnDone Along with Samsung Tool PRO v.23.9

  10. RandikPixie says:

    I think you must have eng aboot saddly reset MSL not enough for write certtitle=frown

  11. Metaton-alfred says:
    Quote:
    rn mhamm >
    I think you must have eng aboot saddly reset MSL not enough for write certtitle=frown

    wht u mean can u tell me

  12. kijiji says:

    [QUOTE=CHAUDHRAY ARSHAD;11496417]it still same

    rn BACKUP INSTRUCTIONS:
    rn Phone must be rooted!
    rn If the software can’t root the phone automatically,
    rn then you must root your device manually.
    rn 1. Power on the phone.
    rn 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    rn go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    rn 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    rn 4. Select device in ADB settings.
    rn 5. Press ‘Read EFS’ button to read backup or ‘Write EFS’ to restore or
    rn press ‘Write CERT’ to restore certificates.

    rn To backup/restore QCN, phone diagnostic port must be enabled.
    rn 1. Power on the phone.
    rn 2. Type *#0808# and select ‘DM+MODEM+ADB’.
    rn 3. Type *#9090# and select ‘DM/DUN over HSIC’.
    rn Or use ‘Activate Diag’ function from ‘Repair’ tab.
    rn 4. Connect phone to PC Along with USB cable, install drivers if wanted.
    rn 5. Select diagnostic port in port settings.
    rn 6. Press ‘Read QCN’ button to read NV backup or ‘Write QCN’ to restore.
    rn Selected model: SM-J500F
    rnSelected port: COM347 SAMSUNG Mobile USB Serial Port
    rnSoftware version: 23.9

    rnReading phone info…
    rnReading IMEI… OK
    rnIMEI: 0
    rnReseting MSL security… OK
    rnReseting… OK
    rnReset MSL done

    rnDone Along with Samsung Tool PRO v.23.9

    rn BACKUP INSTRUCTIONS:
    rn Phone must be rooted!
    rn If the software can’t root the phone automatically,
    rn then you must root your device manually.
    rn 1. Power on the phone.
    rn 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    rn go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    rn 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    rn 4. Select device in ADB settings.
    rn 5. Press ‘Read EFS’ button to read backup or ‘Write EFS’ to restore or
    rn press ‘Write CERT’ to restore certificates.

    rn To backup/restore QCN, phone diagnostic port must be enabled.
    rn 1. Power on the phone.
    rn 2. Type *#0808# and select ‘DM+MODEM+ADB’.
    rn 3. Type *#9090# and select ‘DM/DUN over HSIC’.
    rn Or use ‘Activate Diag’ function from ‘Repair’ tab.
    rn 4. Connect phone to PC Along with USB cable, install drivers if wanted.
    rn 5. Select diagnostic port in port settings.
    rn 6. Press ‘Read QCN’ button to read NV backup or ‘Write QCN’ to restore.

    rnOperation: Write CERT
    rnSelected model: SM-J500F
    rnSelected port: COM347 SAMSUNG Mobile USB Serial Port
    rnSoftware version: 23.9

    rnChecking certificate file… OK
    rnKEY ID: 0338
    rnWaiting ADB device… OK
    rnReading phone info…
    rnModel: SM-J500F
    rnAndroid version: 5.1.1
    rnProduct code: Not Active
    rnPhone version: J500FXXU1AOG1
    rnPDA version: J500FXXU1AOG1
    rnCSC version: J500FOJV1AOG5
    rnCSC country code: SOUTH AFRICA
    rnCSC sales code: XFA
    rnHW version:
    rnPhone S/N:
    rnModem board: MSM8916
    rnRF cal date: NONE
    rnIMEI:
    rnInitialization AT RIL… OK
    rnBypass MSL… error (2)
    rnFirst reset MSL

    rnDone Along with Samsung Tool PRO v.23.9[/QUOTE

    rnreset msl and restart the phone. then write cert.

  13. tavenger52 says:

    still no luck

    nReading phone info…
    nReading IMEI… OK
    nIMEI: 351821071205169
    nReseting MSL security… OK
    nReseting… OK
    nReset MSL done

    nDone Along with Samsung Tool PRO v.23.9

    nChecking certificate file… OK
    nKEY ID: 0338
    nWaiting ADB device… OK
    nReading phone info…
    nModel: SM-J500F
    nAndroid version: 5.1.1
    nProduct code: SM-J500FZWAXFA
    nPhone version: J500FXXU1AOG1
    nPDA version: J500FXXU1AOG1
    nCSC version: J500FOJV1AOG5
    nCSC country code: SOUTH AFRICA
    nCSC sales code: XFA
    nHW version: MP 0.400
    nPhone S/N: RV8G71TMKGY
    nModem board: MSM8916
    nRF cal date: 2015.08.04
    nIMEI:
    nInitialization AT RIL… OK
    nBypass MSL… error (2)
    nFirst reset MSL

    nDone Along with Samsung Tool PRO v.23.9

  14. arminasg says:

    same problem

    nsamsung j500m

    nChecking certificate file… OK
    nKEY ID: 0338
    nWaiting ADB device… OK
    nReading phone info…
    nModel: SM-J500M
    nAndroid version: 5.1.1
    nProduct code: Not Active
    nPhone version: J500MUBU1AOH3
    nPDA version: J500MUBU1AOH3
    nCSC version: J500MUWA1AOH2
    nCSC country code: COLOMBIA
    nCSC sales code: COM
    nHW version:
    nPhone S/N: RV8G91T11RJ
    nModem board: MSM8916
    nRF cal date: 2015.10.08
    nIMEI:
    nInitialization AT RIL… OK
    nBypass MSL… error (2)
    nFirst reset MSL

    nDone Along with Samsung Tool PRO v.23.9

    nto be helped Along with this problem