Login attached to different card! Done with Samsung Tool PRO v.29.8

Home  >>  Z3X box Section  >>  Login attached to different card! Done with Samsung Tool PRO v.29.8

Login attached to different card! Done with Samsung Tool PRO v.29.8

On January 25, 2018, Posted by , In Z3X box Section, With 3 Comments


UNLOCK INSTRUCTIONS:
Unlocking Along with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you cant unlock this phone Along with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will apear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press Unlock button.
5. Paste MSL code in new opened window and press OK.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on Build number in Settings-About phone to enable Developer options,
go to Settings-Developer options and enable USB debugging.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Select device in ADB settings.
5. Press Read Codes via server button, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950W
Software version: 29.8

Checking Login and Password… Login attached to different card!
Checking Login and Password… Login attached to different card!

Done Along with Samsung Tool PRO v.29.8

3 Comments so far:

  1. Wela says:
    Quote:
    rn g_gsm
    UNLOCK INSTRUCTIONS:
    rn Unlocking Along with original MSL code:
    rn Warning! Knox warranty must be active (0x00)!
    rn If you have it voided (0x01(void)), then you can’t unlock this phone Along with MSL.
    rn 1. Phone must be powered on.
    rn 2. Run dialer and type *#0*# (service mode will apear).
    rn 3. Connect the phone to UART cable, choose correct COM port in port settings.
    rn 4. Press ‘Unlock’ button.
    rn 5. Paste MSL code in new opened window and press ‘OK’.

    rn Reading codes using sever:
    rn 1. Power on the phone.
    rn 2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
    rn go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
    rn 3. Connect the phone to PC Along with USB cable, install drivers if wanted.
    rn 4. Select device in ADB settings.
    rn 5. Press ‘Read Codes via server’ button, write your login and password in window if it will apear.
    rn (Login and password will be saved as default after first input and can be changed in settings.)

    rnOperation: Read Codes via Server
    rnSelected model: SM-N950W
    rnSoftware version: 29.8

    rnChecking Login and Password… Login attached to different card!
    rnChecking Login and Password… Login attached to different card!

    rnDone Along with Samsung Tool PRO v.29.8

    answer in log. someone attach login to card.
    rnyou have to know where you shared pass and login.

  2. julianz says:

    same too sir blang…..eversince not share my password and never insert any new card…. ……."login attached to different card".my PC is stricktly private only no one can touch. but why face this problem.?

  3. Bo-Rens says:

    what about when the card its banned? no way to unbanned?