Home >> Z3X box Section >> N950f Frp solution
I have flash Along with combination file ,reset the Frp then flash cpu ap and Bl phone hang kindly if any working solution post it here
rnnot my upload, credit goes to uploader…rnno password
After flashing Along with combination you must flash official firmware Along with all files..
nSelect HOME_CSC_XXX… instead of CSC_XXX… do not use pit file… Flashing Along with HOME_CSC_XXX will do an update Along without an erase so ADB will be kept enabled…
nSelect home_csc_xxx… Instead of csc_xxx… Do not use pit file… Flashing Along with home_csc_xxx will do an update Along without an erase so adb will be kept enabled…
kindly make it clear you mean i only select home only?
hello did get solution for ur note 8,……. i also have the same model n950f still looking for the solution kindly let me know if you have find a way to solve urs
this way dont wanna work if hold the headset it calls instead of opening the google n speak
same problem, not working on note 8, sm-
nany way of solving?
Hi, the ONLY way I could remove the FRP was like this:n 1-Flash combinationn 2-Flash from 4 files firmware from AP part ONLY "system" You can do it Along with Z3X, Octopus or just decompress AP part Along with 7zip and convert system into .tarn 3-Very quickly from lockscreen swipe down goto settings and activate "OEM unlock" on developer options. It took me like 20 attemps. The device reboots very fast into panick kernel. Just press Vol- and Power to reboot into normal mode againn 4-Once OEM unlock it’s ON flash Along with full firmware. Enjoy!n This is the working way I just finished one N950F right now.
n If it to be helped you just hit "Thanks"
you can also downgrade to older build and use bluetooth method
adb enable firmwarernadb shellrnam start -n com .android .settings / com .android. settings. Settings
rn(remove spaces…..should launch settings menu putting you behind setup wizard)
rnadb shellrnsurndd if=/dev/zero of=/dev/block/sda11rndd if=/dev/zero of=/dev/block/sda13
rn(above code used for removing rent-a-center locks)
rnadb shellrnsurndd if=/dev/zero of=/dev/block/bootdevice/by-name/persistrndd if=/dev/zero of=/dev/block/PERSISTENCE
nhi dear,nfollow this link your problem will be solved.
check this bro your problem will be solved.
rn If it to be helped you just hit "Thanks"
rnits working man rnjust do it quickly rnthanks so much
thank you bro working 100%. Just quckly finger
nI try many time but i see only ‘installing applications", not possible to go to menu. I see 1 second the menu but after, black screen Along with installing application and reboot to kernel panic. I try in safe mode or not, same. It’s normal or other solution kindly. Thank’s for all