SM-J327AZ Read Codes via Server Calculating… error (0.2)

Home  >>  Z3X box Section  >>  SM-J327AZ Read Codes via Server Calculating… error (0.2)

SM-J327AZ Read Codes via Server Calculating… error (0.2)

On January 25, 2018, Posted by , In Z3X box Section, With 1 Comment


UNLOCK INSTRUCTIONS:
Unlocking Along with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you cant unlock this phone Along with MSL.
1. Phone must be powered on.
2. Type *#0808# and select DM+ACM+ADB.
3. Run dialer and type *#0*# (service mode will apear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press Unlock button.
6. Paste MSL code in new opened window and press OK.

Reading codes using sever (Diag algo):
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you cant unlock this phone using sever.
1. Power on the phone.
2. Type *#0808# and select DM+MODEM+ADB.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Press Read Codes via server button, select Diag, write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings)

Reading codes using sever (Upload algo):
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on Build number in Settings-About phone to enable Developer options,
go to Settings-Developer options and enable USB debugging.
3. Connect the phone to PC Along with USB cable, install drivers if wanted.
4. Select device in ADB settings.
5. Press Read Codes via server button, select Upload write your login and password in window if it will apear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-J327AZ
Software version: 30.4

Checking Login and Password… OK
Ballance: 95 crd.
You have 95 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device… OK
Reading phone info…
Model: SAMSUNG-SM-J327AZ
Android version: 7.0
Product code: SM2J327AZSZAIO
Phone version: J327AZTUU1AQF1
PDA version: J327AZTUU1AQF1
CSC version: J327AZAIO1AQF1
CSC country code: USA
CSC sales code: AIO
HW version: REV0.1
Phone SN: R28J92A0C7K
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-06-01
RF cal date: 20170918
IMEI: 355602081259024
Rebooting phone… OK
Waiting ADB device… OK
Initialization zTool… OK
Running zTool, kindly wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data from phone… OK
Searching Ramdump interface… COM158 detected
Calculating… error (0.2)
Done Along with Samsung Tool PRO v.30.4

One Comment so far:

  1. sulmanz says:

    Checking Login and Password… OK
    nBallance: 35 crd.
    nYou have 35 credit(s) left. This operation takes 5 credits.Continue? Yes
    nSearching Samsung modem… detected COM25
    nReading phone info… OK
    nModel: SM-J327AZ
    nAP version: J327AZTUU1AQF1
    nCSC version: J327AZAIO1AQF1
    nCP version: J327AZTUU1AQF1
    nProduct code: AIO
    nPhone SN: R28JA22QBCA
    nUnique number: CQ3006054D46B74
    nSearching Samsung diag port… detected COM24
    nReading phone info… OK
    nCP version: J327AZTUU1AQF1
    nCP build: Jun 20 2017 10:32:20
    nReading data from phone… OK
    nCalculating… OK
    nSearching server… OK
    nWaiting for server answer… OK
    nFreeze code: 28048682
    nNET lock: 17913850
    nSUB lock: 00000000
    nSP lock: 00000000
    nCP lock: 00000000
    nSIM lock: 00000000
    nFor check lock status: *#7465625#
    nDone Along with Samsung Tool PRO v.30.4